Buick ManageUPS Uživatelský manuál stáhnout pdf (Strana 28)

File Transfers

ManageUPSNET User Instruction Manual 25

9. Select the Administration option from the

Main Menu. This will display the

Administration Menu.

10.Select the File Transfer option. This will

display the File Transfer Menu.

11.Use this screen to enter the IP address of the

TFTP server and the full path and ﬁle name

of the ﬁrmware ﬁle.

12.Select the Initiate File Transfer using TFTP

option to begin the File Transfer.

13.The Console will provide status

information during the ﬁle transfer. The

adapter will reset when the update is

complete and your connection will be lost.

You must wait about 30 seconds before

reconnecting.

Upgrade Using XMODEM

The following steps should be taken when

updating the ManageUPS

NET using the Serial

Console and XMODEM.

1. Obtain the latest ﬁrmware(ﬁrmware.gz)

from ONEAC and place it in a directory

named \Manageupsnet on your PC. The PC

must be connected to the network.

2. Connect the ManageUPS

NET to an available

serial port on your computer using the cable

supplied (ONEAC part# CA-9F).

3. Open a terminal program such as

HyperTerminal. Conﬁgure the session to

9600 baud, no parity, 8 data bits, 1 stop bit

and no ﬂow control. Also conﬁgure the

session to convert all Carriage Returns (CR)

to Carriage Return LineFeeds (CRLF).

4. Type CONSOLE and press [ENTER].

5. The ManageUPS

NET will ask you for a user

name and password. The default user name

is “admin” the default password is

“admin.” Yours may be different.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 66 67

Komentáře k této Příručce

Žádné komentáře