Buick ManageUPS Uživatelský manuál stáhnout pdf (Strana 34)

File Transfers

ManageUPSNET User Instruction Manual 31

2. Ensure that the adapter is attached to the

network and has already been conﬁgured

with an IP address, Subnet Mask and a

Default Gateway. The FTP server must also

be enabled.

3. If you are using Telnet go to step 4, if you

are using serial communications then skip

to step 5.

4. Open your Telnet client and connect to the

IP address of the ManageUPS

NET adapter

you wish to update. Skip to step 9.

5. Connect the ManageUPS

NET to an available

serial port on your computer using the cable

supplied (ONEAC part# CA-9F).

6. Open a terminal program such as

HyperTerminal. Conﬁgure the session to

9600 baud, no parity, 8 data bits, 1 stop bit

and no ﬂow control. Also conﬁgure the

session to convert all Carriage Returns (CR)

to Carriage Return LineFeeds (CRLF).

7. Type CONSOLE and press [ENTER].

8. The ManageUPS

NET will ask you for a user

name and password. The default user name

is “admin” the default password is

“admin.” Yours may be different.

9. Select the Administration option from the

Main Menu. This will display the

Administration Menu.

10.Select the File Transfer option. This will

display the File Transfer Menu.

11.Use this screen to enter the IP address of the

TFTP server and the full path and ﬁle name.

12.Select the Initiate File Transfer using TFTP

option to begin the File Transfer.

13.The Console will provide status

information during the ﬁle transfer. The

adapter will reset when the update is

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 66 67

Komentáře k této Příručce

Žádné komentáře